ID: 2831
Advertentie ID: #2831 is verwijderd van uw verlanglijst.
Creek evo(lution) 2 high-end ringkerntrafo topstaat + a.b.!!
€495,00
Geen aanbiedingen geplaatst
Omschrijving
CREEK EVO 2 / EVOLUTION 2 HIGH-END RINGKERNTRAFO TOPSTAAT + A.B. !!
Absolute topversterker van het Engelse High-End merk Creek Audio. Uitgerust met een overbemeten RINGKERNTRAFO en een buffer-capaciteit van 20.000uF. Levert hierdoor een stabiele 2 x 75 Watt aan 8 Ohm !! Verder uitsluitend audiofiele componenten zoals een BURR-BROWN PGA 2311 volume-control en OPA 2134 op-amps. Beschikt over een Pre-Out uitgang voor aansturing van een losse eindversterker.
Google voor de wereldwijd lovende reviews en testen van deze High-End versterker.
Enkele overgenomen specs:
To achieve 75 Watts power into an 8 Ohms load and >110 Watts into 4 Ohms, the mains transformer has to be big. The Evolution 2 uses a 250VA toroidal transformer, which will provide enough current to almost double its output into 4 Ohms. To achieve high-end sound quality, no expense has been spared.
Separate windings are used for each of the high current high voltage and low voltage, analogue and digital circuits. A high capacity power supply using 20,000 micro-Farads of multiple smoothing capacitors are used to power the left and right power amplifiers and provide a very dynamic performance.
The Evolution 2 uses a high quality, Burr-Brown PGA2311, digitally controlled analogue volume control. This allows the user to adjust the volume accurately, from 0 to -80dB. An analogue style rotary encoder, with 40mm solid control knob, is used to alter the volume from the front panel and display the relative level on a large blue coloured VFD. Position 80 is the loudest and 0 is mute. To amplify the signals into the volume control circuit, a high grade Burr-Brown OPA2134 Op-Amp is used as a pre-amplifier. Signal switching is performed by gold contact relays, which are digitally selected from a microcontroller, similar to the Destiny Integrated Amplifier.
The Evolution 2 is configured with higher open-loop gain, using a double differential input and driver stage plus discrete Darlington power output stage, using high current bi-polar transistors. High grade polypropylene capacitors, bypassed with large value electrolytic capacitors, are used to couple and decouple the signal into the power amp.
To keep the amplifier safe, it is monitored by discrete transistor circuitry to protect against over-current demand, short circuits and DC offsets. Relays mute the input and separate the loudspeaker output in the case of faults.
The Evolution 2 operates conventionally with rotary controls for input selection and volume control and buttons for Tape selection and power On/Off. It has four inputs plus tape including a new feature Direct AV, which bypasses the pre-amplifier and volume control to allow the power amplifier to be used in a 5.1 surround system. Input selection is via the SRC3 remote handset or the rotary input selection control. The display brightness can be altered from the SRC3 remote control handset.
Gold plated input and output sockets have been chosen to provide a good connection and appearance for a product at its price point. Loudspeakers are connected with 1 set of 4mm terminal binding posts, with plastic touch-proof covers. The amplifier also has a headphone socket which is becoming an increasingly rare feature of modern amplifiers.
Deze uiterlijk en technisch in topstaat verkerende versterker wordt geleverd inclusief originele afstandsbediening en powercord en is uiteraard te bekijken en te beluisteren.
Absolute topversterker van het Engelse High-End merk Creek Audio. Uitgerust met een overbemeten RINGKERNTRAFO en een buffer-capaciteit van 20.000uF. Levert hierdoor een stabiele 2 x 75 Watt aan 8 Ohm !! Verder uitsluitend audiofiele componenten zoals een BURR-BROWN PGA 2311 volume-control en OPA 2134 op-amps. Beschikt over een Pre-Out uitgang voor aansturing van een losse eindversterker.
Google voor de wereldwijd lovende reviews en testen van deze High-End versterker.
Enkele overgenomen specs:
To achieve 75 Watts power into an 8 Ohms load and >110 Watts into 4 Ohms, the mains transformer has to be big. The Evolution 2 uses a 250VA toroidal transformer, which will provide enough current to almost double its output into 4 Ohms. To achieve high-end sound quality, no expense has been spared.
Separate windings are used for each of the high current high voltage and low voltage, analogue and digital circuits. A high capacity power supply using 20,000 micro-Farads of multiple smoothing capacitors are used to power the left and right power amplifiers and provide a very dynamic performance.
The Evolution 2 uses a high quality, Burr-Brown PGA2311, digitally controlled analogue volume control. This allows the user to adjust the volume accurately, from 0 to -80dB. An analogue style rotary encoder, with 40mm solid control knob, is used to alter the volume from the front panel and display the relative level on a large blue coloured VFD. Position 80 is the loudest and 0 is mute. To amplify the signals into the volume control circuit, a high grade Burr-Brown OPA2134 Op-Amp is used as a pre-amplifier. Signal switching is performed by gold contact relays, which are digitally selected from a microcontroller, similar to the Destiny Integrated Amplifier.
The Evolution 2 is configured with higher open-loop gain, using a double differential input and driver stage plus discrete Darlington power output stage, using high current bi-polar transistors. High grade polypropylene capacitors, bypassed with large value electrolytic capacitors, are used to couple and decouple the signal into the power amp.
To keep the amplifier safe, it is monitored by discrete transistor circuitry to protect against over-current demand, short circuits and DC offsets. Relays mute the input and separate the loudspeaker output in the case of faults.
The Evolution 2 operates conventionally with rotary controls for input selection and volume control and buttons for Tape selection and power On/Off. It has four inputs plus tape including a new feature Direct AV, which bypasses the pre-amplifier and volume control to allow the power amplifier to be used in a 5.1 surround system. Input selection is via the SRC3 remote handset or the rotary input selection control. The display brightness can be altered from the SRC3 remote control handset.
Gold plated input and output sockets have been chosen to provide a good connection and appearance for a product at its price point. Loudspeakers are connected with 1 set of 4mm terminal binding posts, with plastic touch-proof covers. The amplifier also has a headphone socket which is becoming an increasingly rare feature of modern amplifiers.
Deze uiterlijk en technisch in topstaat verkerende versterker wordt geleverd inclusief originele afstandsbediening en powercord en is uiteraard te bekijken en te beluisteren.